Download PDF Download PDF Print this Page Print this Page Email this Page Email this Page Save to Favorites Save to Favorites

Item # item-1215, Inch Series EXTRUDE-TITE® Fasteners

Request Information

  • Designed to resolve the fastening problems of ‘stripping' and ‘spin-out' in THIN SHEET METAL as is often found when using standard round-bodied sheet metal screws
  • Increased torque performance in thin sheet metal applications
  • Low end loads
  • EXTRUDE-TITE® screws tend to drive straight
  • Employs TRILOBULAR™ technology in the joint
  • Electrical grounding assured by the intimate contact of the roll-formed threads
  • Reduces costs by allowing thinner, lighter materials in the assembly
  • Reduces costs by reducing or eliminating repairs due to ‘stripping', ‘spin-outs', and off-angled entry of fastener on the assembly line
  • Reduces costs by eliminating cleanup of chips, oil and debris caused by tapping operations
  • Reduces costs by simplifying assembly - fewer components
  • Reduces costs by simplifying assembly equipment

 

 

Request Information

Specifications

Screw Size 3/8-16 in
Max. C Dimension 0.3810 in
Min. C Dimension 0.3750 in
Max. D Dimension 0.3745 in
Min. D Dimension 0.3685 in
Max. Point Cp 0.158 in
Max. Point Lp 0.344 in

Length Tolerances

Lengths up to and including 1" ±0.030"
Lengths greater than 1" ±0.050"


Advantages

Low starting torque and initial end load, desirable features with large diameter fasteners, are provided by a second thread forming taper and by the TAPTITE II® step in the point. Vibration resistant.


Applications

For extremely rapid hole finding; for applications with floating nut members; where clearance and pilot holes are initially out of line; or where a sheet of material (gasket, carpet) must be pierced.