Print this Page Print this Page Email this Page Email this Page

PLASTITE® TRILOBULAR™ Fasteners

Click on a Product to view details.

Request Information

Inch Series PLASTITE® 48-2 Screws

Inch Series PLASTITE® 48-2 Screws (12)

Plastite® 48-2 Trilobular™ thread-rolling screws have twin lead threads to provide faster, more efficient insertion. The sharp 48° thread profile increases holding strength and reduces material displacement and boss bursting tendencies. Drive and strip torques are higher, making drive tool adjustments simple. NOTE: Component and boss design should allow for much faster engagement than with single lead screws.

Size/TPI – The PLASTITE® 48-2 screw size designation combines the commonly used numerical screw size with the major diameter (Max. "D"), as measured with ordinary micrometers, followed by the number of threads per inch.

Recommended pilot hole sizes are subject to variation dependent on depth of engagement, ease of more...

Inch Series PUSHTITE® II Fasteners

Inch Series PUSHTITE® II Fasteners (10)

PUSHTITE® II Trilobular™ fasteners are designed to be pressed into recommended hole sizes with a single, straight-line stroke. They can be used in a broad range of thermoplastics of widely varying densities.

PUSHTITE® II fasteners combine a 3 lobe thread form with a 70º - 10º semi-buttress thread shape to permit easy entry and provide exceptional pull-out resistance.

Threads are helical, not annular, permitting displaced air to escape during insertion.

The helical thread form also allows the fasteners to be removed and reinserted if necessary.

Recommended length of thread engagement is two screw diameters minimum.

The range of suggested hole sizes is large because of the range of densities in more...

Inch Series PLASTITE® 45 Screws

Inch Series PLASTITE® 45 Screws (16)

Recommended pilot hole sizes are subject to variation dependent on depth of engagement, ease of driving required and material being tapped. Users of PLASTITE® 45 screws should perform their own test to determine the most efficient pilot hole size for their own particular use, or contact the application engineering department of a licensed supplier or REMINC.

Metric Series PLASTITE® 45 Screws

Metric Series PLASTITE® 45 Screws (10)

Recommended pilot hole sizes are subject to variation dependent on depth of engagement, ease of driving required and material being tapped. Users of PLASTITE® 45 screws should perform their own test to determine the most efficient pilot hole size for their own particular use, or contact the application engineering department of a licensed supplier or REMINC.