Download PDF Download PDF Print this Page Print this Page Email this Page Email this Page Save to Favorites Save to Favorites

Inch Series PLASTITE® 48-2 Screws

Request Information

Plastite® 48-2 Trilobular™ thread-rolling screws have twin lead threads to provide faster, more efficient insertion. The sharp 48° thread profile increases holding strength and reduces material displacement and boss bursting tendencies. Drive and strip torques are higher, making drive tool adjustments simple. NOTE: Component and boss design should allow for much faster engagement than with single lead screws.

Size/TPI – The PLASTITE® 48-2 screw size designation combines the commonly used numerical screw size with the major diameter (Max. "D"), as measured with ordinary micrometers, followed by the number of threads per inch.

Recommended pilot hole sizes are subject to variation dependent on depth of engagement, ease of driving required and material being tapped. Users of PLASTITE® 48-2 screws should perform their own test to determine the most efficient pilot hole size for their own particular use, or contact the application engineering department of a qualified supplier or REMINC.

 

 

Items  Request Information

  Item # Screw Size T.P.I. C Dimension D Dimension Min. Out-of-Round Recommended Pilot Hole Size for Soft Ductile Recommended Pilot Hole Size for Brittle
item-1251 2 in - 28 0.086 - 0.092 in 0.083 - 0.089 in 0.002 in 0.076 in 0.080 in
item-1252 3 in - 24 0.104 - 0.110 in 0.100 - 0.106 in 0.002 in 0.088 in 0.094 in
item-1253 4 in - 20 0.121 - 0.127 in 0.117 - 0.123 in 0.002 in 0.100 in 0.106 in
item-1254 6 in - 19 0.141 - 0.147 in 0.137 - 0.143 in 0.003 in 0.122 in 0.128 in
item-1255 7 in - 18 0.160 - 0.166 in 0.154 - 0.160 in 0.004 in 0.134 in 0.142 in
item-1256 8 in - 16 0.179 - 0.185 in 0.173 - 0.179 in 0.004 in 0.149 in 0.158 in
item-1257 9 in - 15 0.193 - 0.199 in 0.187 - 0.193 in 0.004 in 0.162 in 0.172 in
item-1258 10 in - 14 0.206 - 0.212 in 0.202 - 0.208 in 0.004 in 0.175 in 0.185 in
item-1259 12 in - 11 0.229 - 0.235 in 0.224 - 0.230 in 0.005 in 0.195 in 0.206 in
item-1260 12 in - 14 0.226 - 0.232 in 0.220 - 0.226 in 0.005 in 0.195 in 0.205 in
item-1261 1/4 in - 10 0.270 - 0.276 in 0.262 - 0.268 in 0.006 in 0.224 in 0.240 in
item-1262 5/16 in - 9 0.335 - 0.345 in 0.325 - 0.335 in 0.006 in 0.286 in 0.303 in

Check up to five results to perform an action.